HomeOur ServicesAll-on-4

All-on-4 Dental Implants in NYC to Replace a Full Arch of Teeth in a Single Day

Four implants. A full arch. A permanent smile.

A clinician wearing magnifying loupes beside a patient.

Missing most of your teeth—or facing that reality soon? You don’t need an implant for every tooth to get a full, fixed smile back. All-on-4 dental implants replace an entire upper or lower arch on just four implants, often with a same-day set of teeth. At Edgard El Chaar, DDS, PC, we plan every case with precision and rebuild your smile without the delays of traditional methods.

What Is All-on-4?

The name says it plainly. All-on-4 means “all” your teeth are supported “on four” dental implants. It’s a proven technique for replacing a full arch of missing teeth with a permanent, screw-retained set—often placed the same day.

Instead of one implant per tooth, we anchor a complete bridge or denture to just four strategically placed implants. The result is a fixed, natural-looking arch of roughly 12 teeth for your upper jaw, your lower jaw, or both.

Fewer implants. A fixed result. A smile that stays put.

Here’s who this procedure is built for.

What We Do

Who All-on-4 Is For

All-on-4 solves problems that individual implants often can't. It's designed for patients dealing with widespread tooth loss—and for those whose jawbone has thinned too much for conventional implants.

You may be a strong candidate if you're facing:

  • Significant tooth loss— Most or all of your teeth in an arch are missing.
  • Extensive decay— Your remaining teeth are too damaged to save.
  • Jawbone loss— Bone loss prevents you from getting conventionally oriented (vertical) implants.

Tooth loss often comes with loss of jawbone. That usually means bone grafting and reconstruction before implants are even possible. All-on-4 was designed to work around that problem—not add to it.

How All-on-4 Works

All-on-4 is precise, methodical work—and we treat it that way. The technique takes advantage of the dense bone that remains in the front of your jaw, avoiding the areas where bone loss and anatomy get in the way.

Here's how it comes together.

  1. CBCT Scan and Digital Planning

    Success starts with the plan. We evaluate your bone with a CBCT scan—a detailed 3D image of your jaw—then plan your case digitally. This lets us map exactly where each implant goes for the strongest, safest result.

  2. Strategic Implant Placement

    We place at least four implants in the jaw. The two front implants go in vertically, anchored in the dense bone at the front of your jaw. The two back implants are angled—typically 30 to 45 degrees from the biting plane.

    That angle isn’t arbitrary. It’s what makes the whole approach work:

    This is how All-on-4 sidesteps the bone grafting that traditional implants often demand.

    • In the upper jaw, the angled implants sit in front of the maxillary sinus, avoiding the sinus cavities.
    • In the lower jaw, they sit in front of the mental nerve, avoiding the nerve canal.
  3. Attaching Your New Teeth

    The head of each back implant emerges around the second premolar position. That placement lets us cantilever a molar tooth behind it—delivering a full bridge or denture of roughly 12 teeth per arch. In many cases, this happens the same day as surgery.

    Plan it right. Place it precisely. Restore a full smile.

The Advantages of All-on-4

All-on-4 delivers what traditional implant methods often can't, especially when bone loss stands in the way. Here's why so many patients choose it.

  • No bone grafting in most casesBy using existing dense bone and angling the back implants, All-on-4 often skips the grafting and reconstruction traditional implants require.
  • Fewer implants neededA full arch on just four implants means a less complex procedure than one implant per tooth.
  • Same-day teethIn many cases, you leave with a permanent, screw-retained set of teeth the day of surgery.
  • A fixed, permanent solutionYour new teeth are screw-retained, not removable—no adhesives, no slipping.
  • A natural-looking full archRoughly 12 teeth that look, feel, and function like a complete smile.
  • A candidate-friendly optionPatients turned away from conventional implants due to bone loss often qualify for All-on-4.

Real function. Real permanence. Without the long road of grafting and reconstruction.

What's Included in Your All-on-4 Treatment

We plan and deliver your care from evaluation to final smile. Here's what your treatment covers:

  • A thorough evaluationA CBCT scan and careful analysis of your bone structure to confirm you're a candidate.
  • Digital treatment planningA virtual plan mapping exactly where each implant will go.
  • Implant placementAt least four implants per arch, positioned for maximum strength and stability.
  • Your new teethA permanent, screw-retained bridge or denture of roughly 12 teeth per arch.
  • A clear planWe explain every step, in plain language, before we begin.

One coordinated plan. One expert team. One restored smile.

Why the Right Planning Matters

All-on-4 lives or dies by the planning. For the technique to succeed, your bone structure needs careful, precise analysis before a single implant goes in.

That's why we rely on CBCT imaging and digital planning as the foundation of every case. The most ideal way to evaluate your bone is with a 3D scan as it shows us exactly where the dense bone sits, where the sinus and nerve run, and how to angle each implant for a lasting result.

  • Precise bone evaluationA CBCT scan reveals what a standard X-ray can't.
  • A mapped-out planWe design your implant placement digitally before surgery.
  • A stronger outcomeCareful planning is what makes a full arch on four implants dependable.

Great results aren't luck. They're planned.

Your Care Team

Periodontists at Edgard El Chaar

Periodontists specialize in the gum and bone that support your teeth. These are the doctors who provide this treatment here.

Each profile covers the doctor’s training, credentials and areas of focus.

View all doctors

The Practice

Why Choose Edgard El Chaar, DDS, PC

Implant expertise

Deep experience placing implants and restoring full arches with precision.

Advanced planning technology

CBCT imaging and digital planning behind every case.

A bone-smart approach

We use your existing bone strategically to avoid unnecessary grafting.

A permanent result

Fixed, screw-retained teeth built to look natural and last.

A clear plan

Honest evaluation and plain-language guidance from start to finish.

Rebuilding a full smile is serious work. Trust it to a team that treats it that way.

Common Questions

Frequently asked questions

Every mouth is different. At your consultation, we answer your questions about your own case.

Book a Consultation

All-on-4 is a procedure that replaces a full arch of missing teeth using just four dental implants. The name means "all" your teeth are supported "on four" implants. It delivers a permanent, screw-retained bridge or denture—roughly 12 teeth—for your upper jaw, lower jaw, or both, often placed the same day as surgery.

All-on-4 is ideal for patients with significant tooth loss or extensive decay, and for people whose jawbone loss prevents them from getting conventional vertical implants. Because the technique uses the dense bone at the front of the jaw and angles the back implants, many patients who don't qualify for traditional implants are still candidates.

The All-on-4 protocol calls for at least four implants placed in a jaw. The two front implants are placed vertically, while the two back implants are angled—typically 30 to 45 degrees from the biting plane—to make the most of your available bone.

The angle is the key to the whole technique. Placing the back implants at roughly 30 to 45 degrees lets them sit in front of the maxillary sinus in the upper jaw and in front of the mental nerve in the lower jaw. This avoids the sinus cavities and nerve canal—and often eliminates the need for bone grafting.

In many cases, yes. All-on-4 allows for a permanent, screw-retained, same-day replacement of a full arch. The exact timing depends on your case, and we'll confirm what's possible for you during your consultation.

Often, no. Tooth loss usually comes with jawbone loss, which traditionally requires grafting and reconstruction before implants. All-on-4 is designed to avoid that by using the dense bone that remains in the front of your jaw and angling the back implants around the sinus and nerve.

Careful planning is essential. We evaluate your bone structure with a CBCT scan—the most ideal way to assess bone—and plan your case digitally. This lets us map exactly where each implant will go for the strongest, safest, most reliable result before surgery begins.

Your final result is a bridge or denture of approximately 12 teeth per arch. Because the back implants emerge around the second premolar position, a molar tooth can be cantilevered behind them—completing a full, natural-looking arch.

Yes. Your new teeth are screw-retained and fixed in place—not removable like traditional dentures. There are no adhesives and no slipping. It's a permanent, functional replacement for a full arch of teeth.

Traditional implants often use one implant per tooth and frequently require bone grafting when bone is lost. All-on-4 supports a full arch on just four implants, uses your existing dense bone strategically, and often skips grafting altogether—making it a faster, less complex path to a fixed full smile.

Start with a consultation. We'll take a CBCT scan, evaluate your bone structure, and explain whether All-on-4 is right for you. From there, we'll build a clear treatment plan—so you know exactly what to expect before we begin.

Appointments

Take the First Step Toward a Full, Fixed Smile

Widespread tooth loss and bone loss don't have to keep you from a complete smile. Book a consultation and let us evaluate your bone with a CBCT scan, explain your options, and build a plan that restores your full arch.

All-on-4Edgard El Chaar, DDS, PC Book a Consultation